The Selective Laser Sintering 3D printing technology allows us to bring the polymer powders to temperature and sintering using the heat generated by one or more lasers that can be moved with galvanometers, guaranteeing a surface finish, precision and mechanical characteristics that are difficult to match with other technologies.
Polimers | Mechanical characteristics | Thermal characteristics | Electrical characteristics | Density | |||
Tensile strength [Mpa] |
Elongation at Break [%] |
Shore hardness |
Melting Point [°C] |
Softening point [°C] |
Surface electrical resistivity [Ω/cm2] |
Density [g/cm³] |
|
PA12 Smooth | 32 | 10 | 74 D | 185 | - | - | 0.92 |
PA11 Onyx | 48 | 55 | 76 D | 200 | - | - | 1.03 |
PA11 ESD | 46/50 | 27 | 76 D | 204 | - | 5.3x104 | 1.03 |
Flexa Grey | 3.7 | 136 | 70/90 A | 160 | 67.6 | - | 0.74 |
Flexa Soft | 1.8 | 137 | 45/58 A | 150 | 60 | - | 0.77 |
Flexa Bright | 10 | 318 | 79 A | 160 | 75.1 | - | 0.95 |
TPE | 6 | 196 | 90 A | 190 | - | - | 0.70 |
Polipropilene (PP) | - | - | - | - | 105/160 | - | - |
PA11 Carbon Fiber | 81 | - | - | - | - | - | - |